Tektronix 1103

Tektronix 1103 --- TEKPROBE POWER SUPPLY

Manufacturer: Tektronix Model # : 1103 Categories: Probe-Accessories -> accessory There is no current pricing information available for 1103. Please add to a quote request or call 86-755-83777077 and we will get back to you with a price.

Description:

Powers up to Two Probes
For Use with P6203, P6204, P6205, P6217, P6231, P6243, P6245, P6701B, P6703B, P6711, P6713, P6723, P6246, P6247, P5205, P5210, ADA400A and TCP202 on Non-TEKPROBE Scopes*
Overload Protected
 

 
The 1103 is an accessory power supply that provides external power to TEKPROBE BNC Interface probes. The 1103 allows customers to use probes requiring TEKPROBE interface power with any oscilloscope or digitizer that does not provide TEKPROBE BNC power.

The 1103 offers two independently controlled channels consisting of a TEKPROBE BNC interface input, a voltage offset control (providing variable offest or no offset) and BNC signal output.

The offset control supplies a voltage, adjustable via the front panel control. This offset control is available for TEKPROBE BNC probes with this capability. These include: P6235, P6245, P6246, P6247, P6248, P6249 and P6330.

* The characteristics for TEKPROBE BNC Interface probes are subject to change when used with the 1103 TEKPROBE Power Supply. Bandwidth, Rise-time, Propagation Delays will generally differ from the advertised probe only specification. These are dependent upon: 1) the cable length from the output BNC connector to the oscilloscope input, 2) the instrumentation input impedance the output BNC is being connected to, and 3) any additional adapters required to properly interface to the test instrumentation.

To use TEKPROBE BNC Interface probes on the 11800, CSA800, TDS8000, CSA8000 or any non-TEKPROBE BNC interface test instrumentation requires an 1103 TEKPROBE Power Supply, an SMA Male to BNC Female adapter, a 50 Ohm BNC cable and if required a 50 Ohm feedthrough termination. 

Quality Assurance:

Most of our equipment is tested in our staff on-site laboratory prior to shipping. An operational check is performed on all equipment sold to insure that it meets or exceeds the manufacturer's specifications.
We supply all available standard accessories and an operation manual with most pieces of equipment.
Consult your Application Engineer at 86-755-83777077 for details specific to this model.

You may also be interested in these Comparable Instruments

TEKPROBE POWER SUPPLY(Model #1103)	TEST FIXTURE(Model #16080A)
TEST FIXTURE(Model #16334A)	TEST LEADS(Model #16048C)
TEST FIXTURE(Model #16092A)	PROGRAMMABLE AMPLIFIER(Model #AM5030)
POWER MODULE(Model #TM5003)	TEST FIXTURE(Model #16047A)
30MHz-1GHz Close-field probe(Model #11940A)	TEKPROBE POWER SUPPLY(Model #41800A)
16channel Multiplexer(Model #34907A)	Test Lead (Model #16048A)
USB/GPIB Interface(Model #82357A)	USB/GPIB Interface High-Speed USB 2.0(Model #82357B)
TEST FIXTURE(Model #16047D)	USB HOST INTERFAVE(Model #N2865A)
MARITSU(Model #MA9714B)	MARITSU(Model #MA9713A)