Agilent/HP 3764A
Agilent/HP 3764A --- DIGITAL TRANSMISSION ANALYZER
 Description:
The HP 3764A can generate coded data at pre-selected Bit rates or Binary Data in the range 1 kbit/s to 170 Mbit/s. Jitter Generation can be configured to generate Jittered, CMI coded or Binary Data at 139.264 Mbit/s. Features a HB-IP connecter.
Digital transmission tester functions as a transmitter / receiver set to perform error analysis. Data formats include CMI format at 139 Mb/s; HDB3 format at 34, 8 & 2 Mb/s binary-RZ format from 1 kb/s to 150 Mb/s; NRZ from 1 kb/s to 170 Mb/s. ECL outputs 75 ohm unbalanced. Measurements include error count, error ratio, error seconds, error-free seconds, % unavailability errored seconds, % severely-errored seconds, and % degraded minutes analysis. HP-IB.
Digital transmission tester functions as a transmitter / receiver set to perform error analysis. Data formats include CMI format at 139 Mb/s; HDB3 format at 34, 8 & 2 Mb/s binary-RZ format from 1 kb/s to 150 Mb/s; NRZ from 1 kb/s to 170 Mb/s. ECL outputs 75 ohm unbalanced. Measurements include error count, error ratio, error seconds, error-free seconds, % unavailability errored seconds, % severely-errored seconds, and % degraded minutes analysis. HP-IB. Error analysis at 2, 8, 34 and 139 Mb/s Internal printer Error analysis per CCITT G.821
The Agilent HP 3764A is a used Digital Transmission Analyzer that analyzes the error performance of high speed digital transmission systems. Full 140 Mb/s error measurement, jitter generation and measurement, portable single unit construction.
HP 3764A Digital Transmission Analyzer
- Error analysis at 2, 8, 34 & 139 Mbit/s based on the latest G.821 recommendation
or error & jitter measurment and analysis at 139 Mbit/s only
- Powerful data logging facilities
- Single key measurement set-up using preset memory
- Portable single-unit construction
- Internal printer
Specifications
Generator Section
Clocks: opt 001, 139.264, 34.368, 8.448 & 2.048 MHz
Data Outputs:
Receiver Section
Recovered Clock: 139.264 Mbit/s ¡À 3 Mbit/s; 34, 8, 2 Mbit/s ¡À 100 ppm
Binary Clock: 1 kHz to 170 MHz
Quality Assurance:
Most of our equipment is tested in our staff on-site laboratory prior to shipping. An operational check is performed on all equipment sold to insure that it meets or exceeds the manufacturer's specifications.
We supply all available standard accessories and an operation manual with most pieces of equipment.
Consult your Application Engineer at 86-755-83777077 for details specific to this model.
You may also be interested in these Comparable Instruments
|
|
|
