|
|
| You Are Here: Home -> Signal Generators -> Pulse/Function/Arbitrary Generators -> Tektronix CFG280's details |
|
Tektronix CFG280Tektronix CFG280 --- 0.1Hz -11MHz FUNCTION GENERATOR
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
CFG253 |
CFG280 |
|---|---|---|
|
Waveform outputs |
Square wave, sine wave, triangle wave, TTL pulse, sweep functions for all outputs |
Square wave, sine wave, triangle wave, TTL pulse, sweep functions for all outputs |
|
Ranges |
1.0 Hz to 3.0 MHz in 7 ranges |
0.1 Hz (calibrated) to 11 MHz in 8 ranges |
|
Frequency multiplier |
Variable from 0.3 to 3.0 times the selected frequency range |
Variable from 0.1 to 1 (uncalibrated) 1 to 11 (calibrated) |
|
Dial accuracy |
㊣5% of full scale |
㊣5% of full scale from 0.1 Hz to 10 MHz |
|
Sine wave distortion |
<1% (10 Hz to 100 kHz) |
<1% (10 Hz to 100 kHz), -30 dB at all other frequencies |
|
Triangle wave linearity |
20 Hz to 200 kHz: ≡99%; 200 kHz to 3 MHz: ≡97% |
0.1 Hz to 110 kHz: ≡99%; 110 kHz to 1 MHz: ≡97%; 1 MHz to 11 MHz: ≡95% |
|
Square wave response |
≒100 ns rise/fall time, maximum output into 50 次 load |
≒25 ns rise/fall time, maximum output into 50 次 load |
|
Main output amplitude |
0 to 20 Vp-p |
0 to 20 Vp-p |
|
Attenuator |
20 dB |
20 dB |
|
SYNC/TTL output |
TTL output level, rise <25 ns (20 TTL load) ≡3 V pk |
<25 ns rise/fall time, maximum output into 50 次 load |
|
Main output impedance |
50 次 ㊣10% |
50 次 ㊣10% |
|
DC offset (continuously variable) |
㊣10 V minimum open circuit; ㊣5 V minimum into 50 次 load |
㊣10 V minimum open circuit; ㊣5 V minimum into 50 次 load |
|
Symmetry/duty cycle |
5 to 1 minimum symmetry change |
95/5 fixed (pulse and ramp) |
|
Internal variable sweep rate |
0.5 Hz to 50 Hz |
0.5 Hz to 50 Hz |
|
External voltage-controlled variable sweep range (10 k次 Input) |
100:1 minimum for 0 to +10 VDC input with frequency control set at maximum |
100:1 minimum for 0 to ㊣10 VDC input with frequency control set at 0.1 or 11 |
|
VCF (FM) Input |
|
㊣10 V input shifts frequency ≡100:1 up or down with dial set at 0.1 or 11 respectively |
|
AM |
|
0 to 100%, DBSC, external sine wave only |
|
Warranty |
One year |
One year |
|
Safety |
EN61010-1, UL1244, CSA231 |
EN61010-1, UL1244, CSA231 |
|
EMC |
Meets 89/336/EEC |
Meets 89/336/EEC |
|
CFG280 Counter Specifications | ||
|
Frequency range (AC coupled) |
|
1 Hz to 100 MHz |
|
Sensitivity |
|
30 mVRMS from 1 Hz to 50 MHz; 50 mVRMS from 50 MHz to 100 MHz |
|
Period range/resolution |
|
1 ms to 60 s/1 ms |
|
Crystal frequency |
|
10 MHz |
|
Time base stability |
|
㊣0.001% (㊣10 ppm) from 0 ∼ to 40 ∼C |
|
Frequency accuracy |
|
㊣(time base error + 1 count) |
|
Period accuracy |
|
㊣(time base error + 1 count + trigger error) |
Quality Assurance:Most of our equipment is tested in our staff on-site laboratory prior to shipping. An operational check is performed on all equipment sold to insure that it meets or exceeds the manufacturer's specifications.
We supply all available standard accessories and an operation manual with most pieces of equipment.
Consult your Application Engineer at 86-755-83777077 for details specific to this model.
You may also be interested in these Comparable Instruments![]() |