R&S CMD80

R&S CMD80 --- DIGITAL RADIO COMMUNICATION TESTER

Manufacturer: R&S Model # : CMD80 Categories: RF Communication Test Set -> Digital mobile communications There is no current pricing information available for CMD80. Please add to a quote request or call 86-755-83777077 and we will get back to you with a price.

Description:

Signalgenerator
Frequency range, US Cellular 869MHzto 894MHz
  GSM(US) 1930MHz to 1990MHz
  GSM(Kored) 1805MHz to 1870MHz
Outputlevel RF IN/OUT -20dBm to -124 dBm
  RFOUT2 0dBm to 105dBm
Modulation GPSK
Analyzer    
Frequency range, Cellular 824MHzto 849MHz
  GSM(US) 1850MHz to 1910MHz
  GSM(Korea) 1715MHz to 1780MHz
Powermeasurement(feference level range)
RF IN/OUT (fullscale) +41 dBm to -28 dBm
RF IN2 (fullscale) 0 dBm to -69 dBm
Dynamic range 50dB below reference level
Demodulator O-QPSK
Modulation measurements signal quality(p)
  phase error
  magnitudeerror
  error vector amplitued
  carrier feedthraough
  I/Qimbalance
  cqrrier frequency error
  transmission error
DCvoltoge measuremints Range 0 V to ¡À30V
DCcurrent measurements Range 0 A to ¡À10A
SignallingDigital modes 1595,UB-IS95,J-STD008,T53
D-AMPS;optionCMD-B84  
Frequency rqnge, Cellular 869MHzto 894MHz
  GSM 1930MHz to 1990MHz
Output level RF IN/OUT -17 dBm to -131 dBm
  RF OUT2 +3 dBm to -112dBm
Modulation ¦Ð/4DQPSK or unmodulated
Analyzer  
Frequency range, Celluar 824MHz to 849MHz
  GSM 1850MHz to 1910MHz
Powermeasurement(referene level range)  
RF IN/OUT(fullscale) +39dBm to -60 dBm
RF IN2(full scale) -2dBm to -100 dBm
Power ramp  
Adjacent-channel power  
Modulationmeasurements phase error
  magnitudeerror
  error vector amplitued
  carrier feedthraough
  I/Qimbalance
  cqrrier frequency error
Bit error rate measurement  
SignallingDigital modes IS 136,IS54
RF signal generator  
Frequency range  
AMPS 869MHz to 894MHz
N-AMPS 869 MHz to 894MHz
TACS 935 MHz to 960MHz
J-TACS 860MHz to 870MHz
E-TACS 917 MHz to 950MHz
N-TACS 843 MHz to 846MHz
  863.5MHzto 867MHz
Output level  
RF IN/OUT -20 dBm to -124 dBm
RFIN2 0 dBm to -105 dBm
FM modulation  
RF analyzer  
Frequencyrange  
AMPS 824 MHz to 849 MHz
N-AMPS 824 MHz to 849 MHz 
TACS 890MHz to 915 MHz
J-TACS 915 MHz to 925 MHz
E-TACS 872 MHz to 905 MHz 
N-TACS 898 MHz to 901 MHz 
  918.5MHz to 922 MHz
Referenec level  
RF IN/OUT 0 dBm to +41 dBm
RFIN2 0 dBm to -69 dBm
FM demodulation  
Signaling analog signalling AMPS(IS95)
  NAMPS,TACSMJ/E/N-TACS
Audiosource  
Frequency 50 Hz to 4kHz(single tone)
Output voltage Range 0.1mVto 5V,rms
AF analyzer  
Measurements frequency
  AC voltage
  THD
D SINAD
 

Quality Assurance:

Most of our equipment is tested in our staff on-site laboratory prior to shipping. An operational check is performed on all equipment sold to insure that it meets or exceeds the manufacturer's specifications.
We supply all available standard accessories and an operation manual with most pieces of equipment.
Consult your Application Engineer at 86-755-83777077 for details specific to this model.

You may also be interested in these Comparable Instruments

DIGITAL RADIO TESTER(Model #CTS 50)	DIGITAL RADIO COMMUNICATION TESTER(Model #CMD80)
DIGITAL CORDLESS TELEPHONE TESTER(Model #AH-5501)	TDMA/CDPD CELL TESTER(Model #UCELL-100)
PDC/PHS TRANSMITTER TESTER(Model #VS-2720A)	800 MHz - 1.5 GHz Radio Tester(Model #MT2607C)
GSM Mobile Station Test Set(Model #E6392B)	GSM RADIOCOMMUNICATION TEST SET ANALO UNIT(Model #1025.8501.02)
DIGITAL RADIO COMMUNICATION TESTER(Model #CMD55)	GSM/DCS/PCS MS test set(IF)(Model #8922M)
GSM MS Test Set(Model #8922H)	GSM/DCS/PCS RF interface(Model #83220E)
PDC 800MHz/PDC 1.5GHz Signalling Tester(Model #MD1623B)	CDMA Tester(Model #NJZ-916A)
CDMA Tester(Model #NJZ-916C)	RADIO COMMUNICATION ANALYZER (Model #MT8801B)
RADIO COMMUNICATION ANALYZER(Model #MD1620C)