| Model |
MG9637A |
| Wavelength range |
1500 to nm |
| wavelength setting resolution |
1pm |
| Absolute wavelehbth accuracy |
<¡À0.1nm |
| Wavelength stability |
<¡À100MHz |
| Wavelengty repeatability |
¡À35pm (80nm range),Typical:¡À7pm (at ¡À3nm,after calibration) |
| Side mode supprission ratio^*2 |
>45dB(1520 to 1570nm)
>40dB(1500 to 1580nm) |
| Linewidth(typical value) |
700kHz (coherent control:off),50MHz (coherent control:on) |
Wavelength switching time
(typical value) |
100ms/1nm,150ms/10nm,500ms/80nm |
| Output1 |
Max.output power |
>-10dBm(1520 to 1570nm)
>-13dBm(1500 to 1580nm) |
| Min.setting ortput power |
<-20dBm |
| Power stabillity^*1 |
<¡À0.01dB/h |
| Power flatness^*3 |
<¡À0.1dB |
| Polarizaation extinction ratio |
>18dB |
| Output 2 |
Output power:>-10dBm |
| Intemal modulation |
200Hz to 20 kHz(square waveform),Duty:50% |
| Extimal modulation^*4 |
1MHz to 3 GHz |
| Interface |
GPIB,RS-232C |
| Main functions |
Wavelength calibration,single-step sweep |
| U/O Connector |
Frequency control input,exemal modulation input,sweep signal output,sweeptrigger sigal output,intemal modulation |
| Warm-up time |
<1h |
| Laser safety |
FDA21-CFR:Class 1
IEC-825:Class 3A |
| Ambient temperature |
Operation:+10¡ãto +35¡ãC,Storage:-20¡ãto +60¡ãC |
| Dimensions and mass |
319(W)*17(H)*450(D)mm,s16kg |
| Power supply |
AC 85 to 132/170 to 250Vac,<190VA |
| EMC |
EN55011:1991,Group 1,Class A
EN50082-1:1992 |
| Satety |
EN61010-1:1993(installation Category ¢ò,Pollution Degree¢ò) |
Quality Assurance:
